10BChapter 11: Network settings
84 TruVision DVR 44HD User Manual
To check network traffic:
1. From the menu toolbar, click Network Settings > Net Detect. The Traffic window appears.
The information displayed is refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click Network Settings > Net Detect.
2. Under the section “Network Delay, Packet Loss Test”, select the NIC to use and enter the
destination address. Click Test.
The test result appears in a pop-up window.
3. If you need to check the current network parameters, click the Network button to get an
overview. The current values for NIC type, DHCP, IPv4 address, IPv4 subnet mask, IPv4
default gateway are shown as well as the preferred DNS server and alternate DNS server if
used.
The NIC Type and Enable DHCP options can be changed. Click Apply to save any
changes made and then click OK to return to the main window.
4. Click Exit to return to live view.
To check network status:
1. When all the network parameters have been set, click the Status button to confirm that all
parameters are operating correctly.
To Next Page
Loading...
