Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 49
Ethernet
TCP/IP
Direct Connect
CK30s
Access point
Host
CK30s in a TCP/IP Direct Connect Network
To use wireless communications in a TCP/IP network
1 Configure these network parameters on each CK30 in the
network:
• Network Name (SSID)
• IP Settings (if not using DHCP)
2 Make sure that your CK30 is talking to the network and that
the network can see your CK30.
3 Configure security. For help, see “Configuring Security” on
page 55.
To Next Page
Loading...
