Intermec CK30

Chapter 2 — Configuring the CK30
50 CK30 Handheld Computer User’s Manual
The easiest way to configure the network parameters on the
CK30 is to use the Configuration Utility. For help, see
“Configuring the CK30 With the Configuration Utility” on
page 36.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK30 communicates with a host
computer through the Intermec Application Server.
Ethernet
UDP Plus
Access point
Host
Intermec Application Server
CK30s
CK30s in a UDP Plus Network