Intermec EasyCoder PF4i Service Manual

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 207
15
Troubleshooting
This chapter explains how to diagnose and fi x troubles that may occur in
an EasyCoder PF-series printer, even if great effort has been made to safe-
guard troublefree printing. Some parts are, however, subject to wear and
may need periodical replacement, such as the printhead.
Please note that replacement parts are generally only available as complete
modules (see the Spare Parts Catalog or Spare Parts List).
This chapter is supplemented by the Technical Bulletins that are distrib-
uted as soon as any new problem has been reported and a remedy has been
found.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g