Intermec EasyCoder PF4i Service Manual

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 211
Chapter 15—Troubleshooting
15.3 Printer Stops Working after Startup
Description:
The printer stops working after a successful startup.
• The Power LED is lit.
• The <Feed>, <Setup>, and <Print> keys, work properly.
Possible Causes and Suggested Remedies:
• Communication problems?
- Refer to Chapters 15.8-15.10.
• Printer malfunction?
- Check if the printer can print test labels in the Test Mode.
Description:
The printer stops working after a successful startup.
• The Power LED is lit.
• There is no reaction on software commands.
• There is no reaction on any keys on the printer’s keyboard.
Possible Causes and Suggested Remedies:
• The printer’s main program has halted due to high external disturbances
from other electrical sources.
- Restart the printer and fi nd out if there are disturbances coming via
the 115/230 VAC supply, via a communication channel, or from
other electrical appliances.
• CPU board failures.
- Refer to Chapter 15.4.
• Power Supply Unit failures.
- Refer to Chapter 15.5.
• Console errors.
- Refer to Chapter 15.6.
Description:
The printer stops working after a successful startup.
• The Power LED is not lit.
Possible Causes and Suggested Remedies:
• Error in the supply of AC power to the printer.
- Refer to Chapter 15.2.
• Faulty console, faulty power LED, or faulty cabling between CPU
board and console.
- Refer to Chapter 15.6.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g