Intermec EasyCoder PF4i Service Manual

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 217
Chapter 15—Troubleshooting
IPL only
• Six possible errors are indicated by messages in the display window:
- Printhead hot (Printhead over-temperature)
- Paused (Empty/paused)
- Paper out (Out of media)
- Ribbon out (Out of transfer ribbon
- Print head UP/Press Feed (Printhead lifted)
- Open&shut cutter (Cutter error)
Some additional errors can be returned to the host as an ASCII number by
the <BEL> command, see IPL Programming, Reference Manual.
Firmware Error
• In case the CPU is unable to access data on a given address, the internal
program will light up the red error LED regardless of any error-handling
program.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g