Intermec EasyCoder PF4i Service Manual

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 77
Chapter 7—Print Mechanism
The parts of the print mechanism fi tted inside the electronics compart-
ment in an EasyCoder PF4i thermal transfer printer are illustrated below.
In an EasyCoder PF2i, the ribbon mechanism is optional. Otherwise, the
parts on the left side of the center section are identical in EasyCoder PF2i,
PF4i, and PF4i Compact Industrial.
Stepper motor
Pulley & belt
(Platen roller)
Pulley & belt
(Liner drive roller)
Headlift sensor
Headlift linkage
Ribbon mechanism
(optional in EasyCoder PF2i)

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g