Intermec EasyCoder PX6i User Manual

EasyCoder PX6i User’s Guide (Fingerprint version) 123
Appendix A — Technical Data
Ambient Operating Tem-
perature
+5°C to +40°C (+41°F to +104°F)
Storage Temperature -20°C to +70°C (-4°F to +152°F)
Humidity 10 to 90% non-condensing
Electronics
Microprocessor 32 bit RISC
On-board Flash SIMMs 2 sockets for 4MB or 8MB each Std. 1 × 4MB
On-board SDRAM SIMM 1 socket 16MB Std. 16MB
Power Supply
AC Voltage 90 to 265 VAC, 45 to 65 Hz
PFC Regulation IEC 61000-3-2
Power Consumption Minimum 20W; Continuous print-
ing, average 125W; Peak 400W
Sensors
Label Gap/Black Mark/
Out of Media
Yes Variable posi-
tion
Printhead Lifted Yes
Ribbon End/Ribbon Low Yes
Paper Sensor Yes
Controls
Indicator Lamps 3
Display 2 × 16 character LCD Background
light
Keyboard 22 keys membrane-switch type
Print button 1
Beeper Yes
Data Interfaces
Serial 1 × RS-232 + 1 × USB
Bar Code Wand Yes
Connection for Optional
Interface Boards
1 + 2 1 for EasyLAN
2 for other
boards
Cutter Interface 1
Memory Card Adapter 1 CompactFlash
cards

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g