Intermec SR61

Chapter 1 — Learning About the SR61
SR61 Cordless Scanner User’s Manual 5
Understanding the Lights
The lights on the SR61 indicate the status of the battery, a
successful decode of a bar code, or the status of the Bluetooth
connection.
SR61 Lights: The status light is either green or red, and the Intermec Ready-
to-Work™ indicator is blue.
Intermec
Ready-to-Wor
k
indicator
Status light
Status Light Description
Light State What It Means
Blinks green one
time
The SR61 successfully decoded a bar code and
sent the data to the host.
The SR61 successfully scanned a configuration
bar code.
Flashes red when
you pull the trigger
The battery is low. You need to charge the
battery.
Flashes red and
stays on for 2
seconds
You scanned a bar code, but the data was not sent
to the host.
You scanned a configuration bar code and the
SR61 did not accept it.
Note: When the SR61 is in the 1-bay charger, the status light
indicates the battery charging status. For more information, see
the instructions that ship with the charger.