Intermec SR61

Chapter 4 — Configuration Command Reference
42 SR61 Cordless Scanner User’s Manual
Bluetooth PIN
When Bluetooth security is enabled, the Bluetooth PIN is used to
authenticate the Bluetooth link and encrypt the data. Depending
on the Bluetooth software on your host device, you should only
need to enter the Bluetooth PIN the first time you connect and
pair the SR61.
For help configuring a Bluetooth PIN, see “Configuring
Security” on page 22.
Bluetooth Profile
Configures the SR61 to connect to a host device through the
Serial Port Profile (SPP) Bluetooth communications profile. SPP
allows the SR61 to use the Bluetooth link as a serial port to
communicate with the host device.
For more information, see “Configuring Bluetooth
Communications” on page 22.
Bluetooth Security
Enables or disables Bluetooth security. When Bluetooth security
is enabled, you need to enter the SR61 Bluetooth PIN before you
can use the scanner. For more information, see “Configuring
Security” on page 22.
BPO
SR61xA (area imager) and SR61xE (near-far range area imager)
only. Enables or disables decoding of BPO (British Post Office)
4-state bar code symbology. BPO was developed by the British
Post office for encoding European postcode data similar to the
way the U.S. Postnet symbology is used for encoding Zip Code
data. BPO provides European countries with a simple and
efficient postal bar coding scheme.
Canada Post
SR61xA (area imager) and SR61xE (near-far range area imager)
only. Enables or disables decoding of Canada Post 4-state bar
code symbology. Canada Post contains addressing as well as
customer-specific information. Canada Post sends mail pieces
through Canada Post’s integrated distribution system in the most
cost-efficient way.