Intermec SR61

Chapter 4 — Configuration Command Reference
SR61 Cordless Scanner User’s Manual 35
Configuration Commands By Function
The configuration commands are grouped by function and
reflect the organization of the Commands window in EasySet.
Reset All Parameters
Command Default Value See Page
Administrator reset factory defaults N/A 39
User reset factory defaults N/A 55
Data Transmission Settings
Bluetooth Command Default Value See Page
Bluetooth security Active 42
Bluetooth PIN 0000 42
Bluetooth discoverable Fully discoverable 41
Bluetooth pageable mode Not active 41
Bluetooth profile Serial port profile (SPP) 42
Bluetooth device name SR61 Scanner <Bluetooth
Address>
41
Bluetooth connect/disconnect Disconnect 40
Data Transmission
Command
Default Value See Page
Data editing N/A 45
Postamble <CR><LF> 49
Preamble None 49
Symbology identifier Not transmitted 51