Intermec SR61

Chapter 4 — Configuration Command Reference
48 SR61 Cordless Scanner User’s Manual
Matrix 2 of 5
Enables or disables decoding of Matrix 2 of 5 symbology. Matrix
2 of 5 is a discrete bar code derived from Code 11.
China Post is available as part of the Matrix 2 of 5 symbology
start/stop code. China Post encodes 11 digits with no check digit
and has unique start and stop patterns.
Maxicode
SR61xA (area imager) and SR61xE (near-far range area imager)
only. Enables or disables decoding of Maxicode symbology.
Maxicode is a fixed 2D symbology that contains an array of
hexagons arranged around a circular pattern. Maxicode is mostly
used in package sorting and tracking applications.
Micro PDF417
Enables or disables decoding of Micro PDF417 symbology.
Micro PDF417 is a multi-row symbology based on PDF417,
designed to maximize area efficiency for applications that do not
need the maximum data capacity of PDF417. Micro PDF417
contains a limited set of symbol sizes that each includes a fixed
level of error correction.
MSI
Enables or disables decoding of MSI symbology. MSI code is
similar to Plessey code in that it includes a start pattern, data
characters, one or two check digits, and a stop pattern.
PDF417
Enables or disables decoding of PDF417 symbology. The
PDF417 symbology is a stacked 2D symbology that allows you to
scan across rows of code. Each row consists of start/stop
characters, row identifiers, and symbol characters (which consist
of four bars and four spaces each and contain the actual data).
This symbology uses error-correction symbol characters
appended at the end to recover loss of data.
Macro PDF417, a feature of PDF417, extends the capability of
PDF417 by allowing up to 99,999 PDF417 symbols to be used
to store data. The symbols are concatenated as they are scanned
and can be scanned in any order.