Intermec SR61

Chapter 4 — Configuration Command Reference
SR61 Cordless Scanner User’s Manual 41
Bluetooth Device Name
Assigns the name to the scanner. If the scanner is in a
discoverable state, its Bluetooth device name is available to
host computers during device discovery.
Bluetooth Device Page
If your SR61 is within Bluetooth communication range of the
host PC and Bluetooth Pageable Mode is enabled, you can page
the SR61 from EasySet. For help, see “Paging the SR61” on
page 29.
Bluetooth Discoverable
Determines the discoverable state of your SR61. When your
SR61 is discoverable, it is visible to other Bluetooth devices in
communication range.
Bluetooth Pageable Mode
Enables or disables the Bluetooth Device Page command.
With Bluetooth Pageable Mode enabled, the SR61 maintains
Bluetooth communication with the host device so that you can
use the Bluetooth Device Page command to locate the SR61. For
help, see “Paging the SR61” on page 29.
With Bluetooth Pageable Mode disabled, the SR61 turns off and
disconnects after 30 minutes of inactivity. Disabling Bluetooth
Pageable Mode also saves battery power.
Bluetooth Discoverable States
State Description
Fully Your SR61 is discoverable to Bluetooth management
applications.
Limited Your SR61 is discoverable to Bluetooth management
applications for 30 seconds.
Not Your SR61 is not discoverable to Bluetooth management
applications.
Note: Your SR61 is not discoverable by other Bluetooth devices
while connected to a host device.