Intermec SR61

Chapter 4 — Configuration Command Reference
50 SR61 Cordless Scanner User’s Manual
Predefined Security Levels
Defines the security level to use when decoding bar codes. When
you select a lower decode security level, the SR61 can decode bar
codes with poorer print quality.
QR Code
SR61xA (area imager) and SR61xE (near-far range area imager)
only. Enables or disables decoding of QR Code symbology. QR
Code is a 2D matrix symbology containing dark and light square
data modules.
RSS 14
Enables or disables decoding of Reduced Space Symbology (RSS)
14 1D or stacked 2D codes. RSS 14 is a numeric symbology that
can read stacked omni-directional bar code labels. It is a member
of the EAN.UCC RSS symbology family.
RSS Expanded
Enables or disables decoding of Reduced Space Symbology (RSS)
Expanded. RSS Expanded is an alphanumeric symbology that
can read RSS limited and stacked bar code labels. It is a member
of the EAN.UCC RSS symbology family.
RSS Limited
Enables or disables decoding of Reduced Space Symbology (RSS)
Limited. RSS Limited is a numeric symbology that does not read
stacked bar code labels. It is a member of the EAN.UCC RSS
symbology family.
Sensor Optimization
SR61xV (linear imager) only. Sets the linear imager configuration
for the type of bar code being scanned. If you are going to scan
only standard 1D bar codes or only stacked 2D bar codes, you
can set Sensor Optimization to 1D or 2D for optimal imager
performance.
Note: To read RSS 14 stacked 2D codes, RSS Expanded or RSS
Limited must also be enabled.