Intermec SR61

Chapter 4 — Configuration Command Reference
38 SR61 Cordless Scanner User’s Manual
Operating Settings (continued)
Beeps/Green Indicator LED
Command
Default Value See Page
Beep volume High 40
Note (Beep frequency) 2610 Hz 40
Good read beeps
Number 1 47
Duration 80 ms 47
Timing After transmission 47
Good read LED duration 2000 ms 47
Error beep On 46
Setup beep On 51
2D symbologies
Stacked code crackle On 51
Vibrate alert
Vibrate alert Off 55
Duration 300 ms 55
Sensor Optimization and
Imager Settings Command
Default Value See Page
Sensor optimization Automatic 50
Imager settings
Decode mode 2D imager 45
Lighting goal 40 47
Aimer flashing mode Aimer off during
frame acquisition
39
Configuration Modes and Utilities
Command Default Value See Page
Configuration modes and
utilities
Configuration
Enabled
45
Bluetooth device page N/A 41