Initial start up and operation
Version 3.0 (08/2018)
40 Translation of original instruction manual
Service - Change Password
➢ To change the password, enter the old password and twice the new password and transfer
to the MultiControl by pressing the "Submit" button.
The user name cannot be changed.
Loading the factory settings resets the changed password to default.
Loading the factory settings:
➢ Selection „Yes“
➢ Button „Submit“
Destruction of the MultiControl due to premature shutdown of the supply voltage
➢ Ensure that the power supply is uninterrupted until the restart is complete. Duration
of the process about two minutes.
To Next Page
Loading...
