Decommissioning and disposal
Version 3.0 (08/2018)
56 Translation of original instruction manual
9 Decommissioning and disposal
Risk of injury due to improper handling
➢ Decommissioning should only be carried out by authorized specialist personnel.
➢ Only shut down the MultiControl when it is de-energized.
➢ De-energize the MultiControl and secure against unintentional restart.
9.1 Decommissioning
➢ Remove all cables from the MultiControl.
➢ Loosen the screws with which the MultiControl is fastened to the base plate and remove
the MultiControl.
➢ If the MultiControl is to be completely disassembled, also loosen the screws that fix the
base plate to the conveyor frame and remove the base plate from the conveyor frame.
9.2 Disposal
The operating company is responsible for the proper disposal of the MultiControl. In
doing so, the industry-specific and local regulations for the disposal of MultiControl
and its packaging must be observed.
To Next Page
Loading...
Need help?
General
