Interroll MultiControl Instruction Manual

Initial start up and operation
Version 3.0 (08/2018)
Translation of original instruction manual 41
Service - Restart
Restart of the MultiControl:
➢ Selection „Yes“
➢ Button „Submit“
During the restart of the MultiControl, an existing bus connection to a computer or a
PLC is interrupted and must then be rebuilt.
Service - Version
Display of the serial number and the software version of the MultiControl.

Interroll MultiControl Specifications

General

Power Supply	24 VDC
Rated Voltage	24 VDC
Storage Temperature	-20 °C to +70 °C
Communication Protocols	Ethernet/IP, PROFINET, EtherCAT, CANOpen
Number of Channels	4
Weight	0.5 kg