Interroll MultiControl Instruction Manual

Assembly and installation
Version 3.0 (08/2018)
18 Translation of original instruction manual
Repeated assembly
If an already connected MultiControl has to be detached from the base plate, the flat cables must
not be contacted again at the same point, as otherwise proper contact cannot be ensured. So
that the flat cables do not have to be loosened and moved on all MultiControl, the MultiControl
can in this case be fastened via the respective right-hand mounting hole.

Interroll MultiControl Specifications

General

Power Supply	24 VDC
Rated Voltage	24 VDC
Storage Temperature	-20 °C to +70 °C
Communication Protocols	Ethernet/IP, PROFINET, EtherCAT, CANOpen
Number of Channels	4
Weight	0.5 kg