Interroll MultiControl - Page 55

Troubleshooting
Version 3.0 (08/2018)
Translation of original instruction manual 49
Power
Ready
Net
Run
Fault
Meaning
Priority
-
-
-
Flashes
6 x
Voltage error overvoltage
4
-
-
-
Flashes
7 x
Temperature in the MultiControl
too high.
6
-
-
-
Flashes
8 x
Overload protection of the
brake chopper resistor active.
7
-
-
-
Flashes
9 x
Handshake communication
disturbed. See the instructions
for ZPA and ZPA + applications.
-
-
-
Flashes
10 x
No connection to the neighbour.
See the instructions for ZPA and
ZPA + applications
Flashes
10 x
A configured neighbour has an
error (see ZPA+,
"RemoteEmergency" in the error
log)
If several errors occur at the same time, only the highest priority error is displayed.
➢ Troubleshooting see "Troubleshooting", page 50.