INVT Goodrive 35 Series - Page 137

Goodrive35 inverters Function codes
136
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
speed of
asynchron
ous motor
2
function of parameter
autotuning. Correct
parameter autotuning
comes from the
correct setting of the
motor name plate.
In order to ensure the
controlling
performance, please
configure the motor
according to the
standard principles, if
the gap between the
motor and the
standard one is huge,
the features of the
inverter will decrease.
Note:reset the rated
power of the motor
(P12.01), initialize the
motor parameter of
P12.02~P12.05
on
model
P12.04
Rated
voltage of
asynchron
ous motor
2
0~1200V
Depend
on
model
◎
P12.05
Rated
current of
asynchron
ous motor
2
0.8~6000.0A
Depend
on
model
◎
P12.06
Stator
resistor of
asynchron
ous motor
2
0.001~65.535Ω
After finish the motor
parameter autotuning,
the set value of
P12.06~P12.10 will
renew automatically.
These parameters are
basic parameters
controlled by vectors
which directly impact
the features.
Depend
on
model
○
P12.07
Rotor
resistor of
asynchron
ous motor
2
0.001~65.535Ω
Depend
on
model
○
www.barghmaher.ir