INVT Goodrive 35 Series - Page 175

Goodrive35 inverters Basic operation instruction
174
issue.
Besides P00.01 and P00.02, terminal command setting can also used to set the running command
channel.
Current running
command
channel
P00.01
Multi-function
terminal 36
Switch to keypad
Multi-function
terminal 37
Switch to terminal
Multi-function
terminal 38
Switch to
communication
Keypad running
command channel
/
Terminal running
command channel
Communication
running command
channel
Terminal running
command channel
Keypad running
command channel
/
Communication
running command
channel
Communication
running command
channel
Keypad running
command channel
Terminal running
command channel
/
Note: “/” means the multi-function terminal is invalid on the current given channel.
Relative parameters table:
Function
code
Name
Detailed instruction of parameters
Default
value
P00.00
Speed control mode
0: Sensorless vector control mode 0
(apply to AM and SM)
1: Sensorless vector control mode 1
(applying to AM)
2:SVPWM control
2
P00.01
Run command channel
0:Keypad running command
1:Terminal running command channel
(“LOCAL/REMOT” flickering)
2:Communication running command
channel (“LOCAL/REMOT” on);
0
P00.02
Communication running
commands
0:MODBUS communication channel
1: PROFIBUS\CANopen communication
channel
2:Ethernet communication channel
0
www.barghmaher.ir