INVT Goodrive 35 Series - Page 191

Goodrive35 inverters Basic operation instruction
190
Function
code
Name
Detailed instruction of parameters
Default
value
torque
( the rated current of the motor)
P03.13
Torque reference
filter time
0.000~10.000s
0.100s
P03.14
Upper frequency of
forward rotation in
vector control
0:Keypad (P03.16 sets P03.14,P03.17 sets
P03.15)
1: AI1
2: AI2
3: AI3
4:Pulse frequency HDI setting upper-limit
frequency
5:Multi-step setting upper-limit frequency
6:MODBUS communication setting upper-limit
frequency
7:PROFIBUS/CANopen communication setting
upper-limit frequency
8:Ethernet communication setting upper-limit
frequency
9: Reserved
0
P03.15
Upper frequency of
reverse rotation in
vector control
0
P03.16
Keypad setting for
upper frequency of
forward rotation
0.00Hz~P00.03 (the Max. frequency)
50.00 Hz
P03.17
Keypad setting for
upper frequency of
reverse rotation
0.00 Hz~P00.03 (the Max. frequency)
50.00 Hz
P03.18
Upper
electromotion
torque
source
0:Keypad setting upper-limit frequency(P03.20
sets P03.18, P03.21 sets P03.19)
1: AI1
2: AI2
3: AI3
4: HDI
5:MODBUS communication
0
P03.19
Upper braking
torque
source
0
www.barghmaher.ir