0
1
2
3
.
.
.
.
.
.
19
20
P06.14
P06.15
P06.16
AO1
AO2
HDO
P06.17
P06.18
P06.19
P06.20
P06.22
P06.23
P06.24
P06.25
P06.27
P06.28
P06.29
P06.30
P06.26
P06.21
P06.31
(default value is 0)
(default value is 0)
(default value is 0)
P06.00
( HDO output type selection(
0 Running frequency 1 Set frequency
3 Running rotation speed 4 Output current (relative to the inverter)
6 Output voltage 7 Output power
9 Output torque 10 Analog AI1 input value
12 Analog AI3 input value 13 HDI input value
15 MODBUS communication setting 2 16 PROFIBUS communication setting 1
2 Ramp given frequency
5 Output current (relative to the motor)
8 Set torque
11 Analog AI2 input value
14 MODBUS communication setting 1
17 PROFIBUS communication setting 1
18
Torque current (relative to the nominal
current of the motor)
19
Exciting current (relative to the nominal
current of the motor)
20 Reserved
0
1
P06.00
0: open collector high speed pulse
output
1: open collector output
P06.01( P06.02( P06.03( P06.04 output selection
Analog output curve setting
Analog output selection Analog output filter setting