INVT Goodrive 35 Series - Page 210

Goodrive35 inverters Basic operation instruction
209
Set value
Function
Instructions
communication
15
Setting value 2 of MODBUS
communication
-1000~1000,1000 corresponds to 100.0%
16
Setting value 1 of
PROFIBUS/CANOPEN
communication
-1000~1000,1000 corresponds to 100.0%
17
Setting value 2 of
PROFIBUS/CANOPEN
communication
-1000~1000,100 corresponds to 100.0%
18
Setting value 1 of Ethernet
communication
-1000~1000,1000 corresponds to 100.0%
19
Setting value 2 of Ethernet
communication
-1000~1000,100 corresponds to 100.0%
20~21
Reserved
22
Torque current
(100% corresponds to 10V)
0~2 times of the rated current of the motor
23
Exciting current
(100% corresponds to 10V)
0~1 time of the rated current of the motor
24
Setting frequency(bipolar)
0~ the Max. output frequency
25
Ramp reference frequency
(bipolar)
0~ the Max. output frequency
26
Operation speed (bipolar)
0~ the Max. output frequency
27~30
Reserved
Relative parameters list:
Function
code
Name
Detailed instruction of parameters
Default
value
P06.00
HDO output
0: Open collector pole high speed pulse
output
1: Open collector pole output.
0
P06.14
AO1 output
0:Running frequency
1:Set frequency
2:Ramp reference frequency
3:Running rotation speed
4:Output current (relative to 2 times of
0
P06.15
AO2 output
0
P06.16
HDO high-speed pulse
output
0
www.barghmaher.ir