INVT Goodrive 35 Series

Goodrive35 inverters Basic operation instruction
210
Function
code
Name
Detailed instruction of parameters
Default
value
the rated current of the inverter)
5:Output current(relative to 2 times of the
rated current of the motor)
6:Output voltage
7:Output power
8:Set torque value
9:Output torque
10:Analog AI1 input value
11:Analog AI2 input value
12:Analog AI3 input value
13:High speed pulse HDI input value
14:MODBUS communication set value 1
15:MODBUS communication set value 2
16:PROFIBUS/CANopen communication
set value 1
17:PROFIBUS/CANopen communication
set value 2
18: Ethernet communication set value 1
19: Ethernet communication set value 2
20~21: Reserved
22:Torque current(100% corresponds to
10V)
23:Pre-magnetizing current(100%
corresponds to 10V)
24: Setting frequency(bipolar)
25: Ramp reference frequency (bipolar)
26: Operation speed (bipolar)
P06.17
Lower output limit of AO1
-300.0%~P06.19
0.0%
P06.18
Corresponding AO1
output of lower limit
0.00V~10.00V
0.00V
P06.19
Upper output limit of AO1
P06.13~300.0%
100.0%
P06.20
The corresponding AO1
output of upper limit
0.00V~10.00V
10.00V
www.barghmaher.ir