INVT Goodrive 35 Series - Page 96

Goodrive35 inverters Function codes
95
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P05.41
AI2 input
filter time
The setting range of P05.34:P05.32~10.00V
The setting range of P05.35: -300.0%~300.0%
The setting range of P05.36:0.000s~10.000s
The setting range of P05.37:0.00V~P05.39
The setting range of P05.38: -300.0%~300.0%
The setting range of P05.39:P05.37~10.00V
The setting range of P05.40: -300.0%~300.0%
The setting range of P05.41:0.000s~10.000s
The setting range of P05.42:-10.00V~P05.44
The setting range of P05.43: -300.0%~300.0%
The setting range of P05.44:P05.42~P05.46
The setting range of P05.45: 0.00~10.00V
The setting range of P05.46:P05.44~10.00V
The setting range of P05.47: -300.0%~300.0%
The setting range of P05.48:0.000s~10.000s
0.100s
○
P05.42
Lower limit
of
AI3
-10.00
V
○
P05.43
Correspon
ding
setting of
the lower
limit of AI3
-100.0
%
○
P05.44
Zero-drift
value of
AI3
0.00V
○
P05.45
Zero-point
deadzone
voltage of
AI3
0.04V
○
P05.46
Upper limit
of AI3
10.00
V
○
P05.47
Correspon
ding
setting of
the upper
limit of AI3
100.0
%
○
P05.48
AI3 input
filter time
0.030s
○
P05.49
HDI
high-speed
pulse input
function
selection
The function selection when HDI terminals is
high-speed pulse input
0:Frequency setting input, frequency setting source
1~2: Reserved
0
◎
www.barghmaher.ir