Inxpect SRE 200 Series - Page 130

130
Inxpect SRE 200 Series| Instruction manual v1.5 DEC 2023 |Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
11. Technical references
11.5.12 Dynamic configuration switch (redundancy mode coherent)
With one input
With two inputs (encoded channels disabled)
Part Description
Diff Less than 100 ms. If the value is greater than 100 ms, the diagnostic alarm starts and
the system deactivates the safety outputs.
Dynamic
configuration number
For details about the dynamic configuration number and the encoded channel option,
see "Dynamic configuration through the digital inputs" on page35.
Dt Activation/deactivation delay. Less than 50 ms.