I. FOR SAFE OPERATION
15
7.8. Replace all fuel tank and container caps securely.
7.9. To prevent personal injury and property damage,
do the following:
- Always place fuel containers on the ground and
away from the vehicle before fuelling.
- Do not fill the fuel container(s) inside a vehicle or
on a truck or trailer bed.
- When practical, remove a fuel-powered the lawn
mower from the truck or trailer and refuel it with
its wheels on the ground.
- If it is not practical to do this, refuel the lawn
mower on a truck or trailer from a portable con-
tainer, not fuel dispenser nozzle.
- If you must use a fuel dispenser nozzle, keep the
nozzle in contact with the rim of the fuel tank or
fuel container opening until you have completed
fuelling.
8. MOUNTING AND DISMOUNTING OF THE MOWER
DRIVE SHAFT
The mower gear box is driven through a drive shaft with
universal joints from the lawn mower. When connecting
or disconnecting the shaft, follow the next instructions.
8.1. Lower the mower deck onto the gournd, stop the
engine, draw the engine key, and apply the park-
ing brakes before mounting or dismounting the
drive shaft.
8.2. Shift the PTO lever to the OFF position(N).
8.3. Make sure that the PTO shaft and mower blades
stop completely.
8.4. The drive shaft should be mounted or dismounted
at the lawn mower side. Never leave the shaft
connected only at the lawn mower side. If the
PTO shaft be driven unexpectedly, the shaft will
be swung around and damage the lawn mower or
cause serious accidents.
To Next Page
Loading...
