Iseki SBC550X - Troubleshooting

VI. TROUBLESHOOTING
95
VI. TROUBLESHOOTING
Troubles Presumable causes Remedies
･Filling rate of container is poor ･Front PTO belts are worn down
･Tension of belt is poor
･Net of container is clogged
･Shooter is clooged with grass
･Mower deck is clogged with grass
･Location of cleaning plate is poor
･Too low engine speed
･Engine power is down
･Grass is too moist
･Too tall grass
･Too fast traveling
･Too dense grass
･Adjustment of grass limit sensor is
poor
･Replace belts with new one
･Check belt and correct it
･Clean
･Clear the clogged grass
･Clear the clogged grass
･Set the cleaning plate properly
･Mow at full throttle (
)
･Check engine oil, air cleaner, coolant
and clean radiator net, intake net
･Wait until grass becomes dry
･Try to mow two steps
･Slow down sufficiently
･Try to mow two steps
･Adjust it properly
･Excessive noise and vibration ･Loose bolts and nuts
･Fulcrum of collector link is poor
･Cramp of hydraulic hose is loosen
･Short of grease with collector link
･Retighten them properly
･Check and consult your dealers as
necessary
･Cramp it properly
･Inject grease with collector link
･Collector does not move. ･Short of grease with collector link
･Install hydraulic hose by mistake
･Too low engine speed
･Defective hydraulic system
･Inject grease with collector link
･Check and correct
･Raise engine speed
･Consult your dealer
NOISE & VIBRATION
NOISE:
SXG22+SCMA54
+SBC550X-H
SXG22+SCMA54
+SBC550X-L
SXG22+SCMA48
+SBC550X-H
SXG22+SCMA48
+SBC550X-L
SXG19+SCMA48
+SBC550X-H
SXG19+SCMA48
+SBC550X-L
Sound power level db(A) 105 105 105 105 105 105
Sound power level at operator's ear db(A) 90 90 90 90 90 90
Speed of rotation
Engine min-1(rpm) 2865 2865 2865 2865 2865 2865
Blade min-1(rpm) 1976 1976 2185 2185 2185 2185
Test code EEC 84/538
VIBRATION:
SXG22 SXG19
Weighted root mean square acceleration less than value to which the arms are subjected Max. 15 m/s2 Max. 5 m/s2
Weighted root mean square acceleration less than value to which the body is subjected Max. 15 m/s2 Max. 5 m/s2
Speed of rotation of the engine 2865 min-1(rpm) 2865 min-1(rpm)
Test code ISO 5349