IV. INSPECTION AND MAINTAINANCE OF MAJOR PARTS
93
4. PERIODICAL INSPECTION TABLE
SBC550XH and SBC550XL
○
: Inspection, replenishment, and adjustment △ : Cleaning and washing
●
: Replacement ★ : Consult your dealer.
Check points
Pre-
operation
Inspection and servicing
intervals (hours of operation)
Intervals
after that
Judgement
criteria
Ref.
page
50 100 150 200 250
Greasing points
○○○○○
Greas up after every 50hrs -
Bolts and nuts
○
-
Pins and clips
○
-
Rear net
○
82
Important:
･ Above mentioned service intervals should be used as reference creteria. If working conditions are harder, earlier
service is recommended.
･ When special technology and special tools are required, consult your dealers.
To Next Page
Loading...
