Iseki SBC550X - Pre-Operational Routine Inspection; Inspection Items Checklist

SXG
38
VI. PRE-OPERATIONAL ROUTINE INSPECTION
It is essential for avoiding accidents or breakdown during operation to keep the lawn mower in goon condition. The
following pre-operational checks should be performed without fail before starting dailiy operation.
･ Confirmation of the operation of safety switches
･ Inspection of the operation of the steering wheel
2. WAY OF INSPECTION AND MAINTENANCE
Refer to the section of "MAINTENANCE."
Warning:
Before inspection, be sure to park the lawn mower on
a level and hard ground, stop the engine, lower the
mower deck onto the ground, draw the starter key,
apply the parking brakes, shift the PTO lever to the
OFF position, and check to see that the mower blades
have completely ceased rotating.
･ Machine weight balance is a very important factor for
safe operation. When your machine is equipped with
an implement such as a cabin, etc., never fail to ask
your dealers about machine balance. Always follow
their advice.
1. INSEPCTION ITEMS
(1) Anything that was abnormal in the previous
operation.
(2) While walking around the lawn mower:
･ Tyre inflation
･ Exterior parts (broken or deformed covers or the
like)
･ Oil leakage (engine oil, transmission oil, fuel, etc.)
･ Inspection and cleaning of air-intake port
･ Inspection of engine oil level
･ Inspection of coolant level
･ Inspection of fan belt
･ Inspection of fuel level
･ Inspection of fuel filter
･ Inspection of transmission oil level
･ Inspection of front and rear wheel tightening bolts
and nuts
･ Inspection of rear axle chain case oil level
･ Cleaning of radiator and radiator screen
･ Inspection of electrical apparatus
･ Inspection of mower blades
･ Inspection of mower-blade driving belt
･ Inspection of mower exterior parts like covers for
damage and deformation
･ Oil leakage from mower gear case
･ Inspection and cleaning of gauge wheels
･ Inspection for loose broken or lost bolts and nuts
･ Inspection for loose, broken or lost pins and clips
(3) While sitting in the operator's seat:
･ Inspection of brakes
･ Adjustment of seat
(4) After having started the engine: