III. SPECIFICATIONS
31
III. SPECIFICATIONS
LAWN MOWER
Model
SXG 22 H SXG 19 H
E42C, E42F2
GE42C, GE42F2
E42C, E42F2 GE42C, GE42F2
Dimensions
overall length 2120 mm (83.5 in.)
overall width 1130 mm (44.5 in.) 1100 mm (43.3 in.)
overall height 1320 mm (52 in.) 1290 mm (50.8 in.)
Weight
515 kg (1135 lb.) 520 kg (1145 lb.) 510 kg (1124 lb.) 515 kg (1135 lb.)
Engine
Model E3112-G03 E3100-G01
Type Vertical, Water-cooled, 4-cycle, diesel
Combustion chamber Swirl chamber type
"No, of cylinders" 3
Total displacement 1123 1006
Output (net)
15.4 kw (21ps)
2600 min-1 (rpm)
14 kw (19 ps)
2600 min-1 (rpm)
Fuel Diesel fuel
Fuel tank capacity 18.5 liters (4.07 imp. gal.)
Transmission
Main transmission HST (Hydrostatic transmission)
Rear axle Chain drive
Travel
Speeds
Forward 0-16.5 km/h (0-10.3 mph) 0-15km/h (0-9.4 mph)
Reverse 0-10 km/h (0-6.3 mph)
Wheel base 1450 mm (57.1 in.) 1365 mm (53.7 in.)
Wheel Tread Front 910 mm (35.8 in.)
Rear 865 mm (34.1 in.) 860 mm (33.9 in.)
Driving system 2WD
Steering system Power steering
Brake system Dry internal-shoe expanding
No. of Brake 1 (Before dif.) 2 (After dif.) 1 (Before dif.) 2 (After dif.)
Tyre size
Front 210 / 60 D-8 16 x 6.5-8
Rear 250 / 60D-14 23 x 10.50-12
PTO Front 1750 min-1 (rpm)
PTO Clutch Belt tension clutch
Minimum ground
clearance
Lawn mower 140 mm (5.5 in.) 110 mm (4.3 in.)
Mower lift 150 mm (5.9 in.) 140 mm (5.5 in.)
MOWER DECKS
Model SCMA 54B SCMA 48B
Type Rotary mower
Cutting width 1372 mm (54 in.) 1220 mm (48in.)
No. of blades 2
Dimensions
Overall length 885 mm (34.8 in.)
Overall width 1430 mm (56.3 in.) 1275 mm (50.2 in.)
Overall height 395 mm (15.6 in.)
Weight
Deck 96 kg (212 lb) 91 kg (201 lb)
Link 9 kg (20 lb)
Cutting-height adjustment1 Adjustable in 7 stages by pin replacement
Cutting-height adjustment2 Dial
Cutting heights 30 - 120 mm (1.2 - 4.7 in.)
To Next Page
Loading...
