SXG
26
(5) Maintenance label
(Code No. 1593-901-015-0)
Shut off the engine and remove the starter key
before performing maintenance or repair work.
･ Maintenance of the caution labels
- The labels should always be clearly seen, that is,
nothing should obscure them.
- When they have become dirty, wash them with soapy
water and wipe off with soft cloth.
- If any of them are torn or lost, order new labels from
your dealer.
- A new label should be placed in the same place where
the old one was located.
- When sticking on a new label, clean the place to
enable the label to stick and squeeze out all air
bubbles trapped under it.
- When replacing a part with a caution label stuck on, a
new caution label should also be ordered.
To Next Page
Loading...
