EasyManua.ls Logo

Iseki SBC550X - Page 63

Iseki SBC550X
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SXG
62
Troubles Presumable causes Remedies
Engine output is insufficient. No fuel
Clogged air cleaner
Engine is overloaded.
Improper fuel
Engine is overheated.
Throttle lever is not in the high
speed (
) position.
Insufficient compression
Improper valve clearances
Defective injection pump
Defective injection nozzles
Incorrect injection timing
Supply with fuel.
Clean element.
Raise cutting height or slow down
lawn mower.
Use proper diesel fuel.
Cool down engine.
Shift it there securely.
Consult your dealers.
Consult your dealers.
Consult your dealers.
Consult your dealers.
Consult your dealers.
Engine is overheated. Low engine coolant level
Loose fan belt
Clogged radiator fins and screen
Low engine oil level
Clogged air-intake openings
Engine is overloaded.
Clogged engine oil filter
Burnt out coolant temperature
warninglamp
Replenish
Tighten it properly.
Clean them.
Replenish engine oil to upper limit.
Clean air-intake screens.
Raise cutting height or slow down
lawn mower.
Ask your dealer to replace it with a
new one.
Consult your dealers.
Oil pressure lamp is blinking Low engine oil level
Low engine oil viscosity
Clogged engine oil filter
Defective oil pump
Defective oil pressure switch
Add oil to upper limit.
Replace with oil of higher viscosity.
Ask your dealer to replace it with a
new one.
Consult your dealers.
Consult your dealers.
Exhaust fumes are white. Clogged air cleaner
Too high engine oil level
Insufficient fuel injection
Clean element.
Drain oil to upper limit.
Consult your dealers.
Exhaust fumes are black. Defective
Clogged intake system
Clogged exhaust system
Excessive fuel injection rate
injection nozzle pressure
Incorrect injection timing
Use proper fuel.
Clean air cleaner element.
Check muffler for clogging and
clean it.
Consult your dealers.
Consult your dealers.
Consult your dealers.
Engine stalls at low speed. Defective injection pump
Defective injection nozzles
Incorrect valve clearance
Consult your dealers.
Consult your dealers.
Consult your dealers.
Engine races. Clogged governor
Engine oil leaks into cylinder.
Consult your dealers.
Consult your dealers.

Table of Contents

Related product manuals