iStorage datAshur® PRO
+
C
User Manual v1.0
37
31. Technical Support
Self-diagnostic Test
Your drive has an onboard self-diagnostic system. Normally, upon drive wake up (KEY button press),
all LEDs will blink once indicating all diagnostic tests have passed. In the rare event that the LEDs
blink twice, it indicates that an error has occurred. The drive is still operational and can continue to
be used; however, iStorage recommends informing your IT Manager or the supplier where the drive
was purchased.
iStorage provides the following helpful resources for you:
www.istorage-uk.com
iStorage Technical Support Specialists are available from
9:00 a.m. to 5:30 p.m. GMT - Monday through Friday.
support@istorage-uk.com
+44 (0) 20 8991 6260
To Next Page
Loading...
