Command Reference Epic 950 OEM Integration Manual
95-05245 Rev G Page 93
ESC E – Form Feed
This command prints the contents of the text buffer, and then advances the print media.
The form is advanced until either of the following two conditions occurs:
• The feed distance specified by the GS L command has been reached
-or-
• A Black Dot/Top of Form indicator has been detected on the print media
When the printer is initially powered on, the default feed distance stored
in NVRAM is used. This value has a factory default of 7.5 inches, and
can be overridden by specifying a new value using the GS L macro
command.
Feed distances specified via GS L are cleared whenever the printer is powered down, or
by issuing the ESC @ or ESC * reset commands.
This command shares identical functionality with the FF command.
See also:
FF – Form Feed
Expression
ASCII [ESC] E
Hexadecimal 1BH 45H
Decimal <27> <69>
Parameters None
To Next Page
Loading...
