Command Reference Epic 950 OEM Integration Manual
95-05245 Rev G Page 103
ESC W – Wrap Data
Description
Causes the characters n1 and n2 to be echoed back to the host. As soon as n1 is
received by the printer, the printer, in turn, will transmit n1 back to the host. Your
program should wait to receive n1 before outputting n2. If you do not wait, you may lose
n1.
If n1 and n2 are received successfully by the host, you can be reasonably assured that
there is an Epic 950 attached to the serial port, and that your program can communicate
with the printer.
Expression
ASCII [ESC] W n1 n2
Hexadecimal 1BH 75H n1 n2
Decimal <27> <87> n1 n2
Parameters n1 = first character to echo
n2 = second character to echo
To Next Page
Loading...
