Command Reference Epic 950 OEM Integration Manual
Page 124 Rev G 95-05245
GS L – Set Feed Length
Description
Sets the distance the print media will advance upon receipt of a form feed (FF or ESC E)
command. The distance is represented in dots, where each dot represents increments of
1/203 of an inch. The number of dots = n1 * 256 + n2.
Expression
ASCII [GS] L n1 n2
Hexadecimal 1DH 4CH n1 n2
Decimal <29> <76> n1 n2
Parameters n1 = the most significant byte
n2 = the least significant byte
Number of dots = inches/203 = (n1 * 256) + n2
Set Feed Length Specifications
Length (in inches) Number of Dots n1 n2
0.5 102 0 102
1.0 203 0 203
2.0 406 1 150
3.0 609 2 97
4.0 812 3 44
5.0 1015 3 247
6.0 1218 4 194
7.0 1421 5 141
8.0 1624 6 88
To Next Page
Loading...
