Command Reference Epic 950 OEM Integration Manual
95-05245 Rev G Page 123
GS G – Print Custom Graphic
Description
Prints a custom graphic. These graphics are predefined by the OEM.
Note: This command only functions in landscape mode.
Expression
ASCII [GS] G n1 n2 t d
Hexadecimal 1DH 47H n1 n2 t d
Decimal <29> <71> <n1> <n2> <t> <d>
Parameters n1 = the most significant byte of left offset
n2 = the least significant byte of left offset
(Left offset = (n1 * 256) + n2)
t = offset from top (in millimeters)
d = the direction to print the arrow. Right = 0; Left = 1
0 = Arrow (→) graphic with inverted “INSERT FACE UP” text
inside.
The figure below shows an example of printing custom graphics. If you were looking at a
ticket printed in landscape mode, the arrow will point to the right.
To Next Page
Loading...
