Command Reference Epic 950 OEM Integration Manual
Page 118 Rev G 95-05245
GS 3 – Image Status Handler
Description
Returns status information specified by the value of the parameter n.
Expression
ASCII [GS] 3 <n>
Hexadecimal 1DH 33 <n>
Decimal <29> <51> <n>
Parameters n = parameter value specified as follows:
n = 0: Printer responds with [ACK] if valid firmware, or
[NAK] if not expanded memory board.
n = 1: Printer responds with checksum of the
downloaded images.
n = 2: Return image directory, printer responds with file
names terminated with [CR].
To Next Page
Loading...
