Command Reference Epic 950 OEM Integration Manual
Page 76 Rev G 95-05245
BEL – Audio Alert
Description
Generates an audio alert. The default is a single sound, lasting the period of time
defined by the audio alert setting defined by the ESC BEL command. If the audio alert
is turned off by setting the number of alert cycles in ESC BEL to zero, this command
does not function.
See also:
ESC BEL <n1> <n2> <n3> – Configure Audio Alert
Expression
ASCII [BEL]
Hexadecimal 07H
Decimal <7>
Parameters None
To Next Page
Loading...
