Command Reference Epic 950 OEM Integration Manual
Page 104 Rev G 95-05245
ESC X – Set Horizontal Starting Position
Description
This command is used in landscape printing to set a new offset from the left margin from
which to begin printing text and bar code objects. Distance is specified in dots (1 dot =
1/203 inch).
The n1 and n2 parameters are evaluated to form a 16-bit word as follows: first, the n1
parameter’s decimal value is multiplied by 256, then the result is added to the decimal
value of the n2 parameter.
Expression
ASCII [ESC] X n1 n2
Hexadecimal 1BH 58H n1 n2
Decimal <27> <88> n1 n2
Parameters n1 = high-order byte of 16-bit word that specifies distance
n2 = low-order byte of 16-bit word that specifies distance
To Next Page
Loading...
