Operational Procedures Epic 950 OEM Integration Manual
Page 48 Rev G 95-05245
Loading tickets into the ticket supply box: (Refer to the label on printer)
• Load tickets into the ticket supply tray, making sure that the Black Dot is
positioned as shown in Figure 18.
• Orient the tickets so that the Black Dot is towards the leading edge of the ticket.
Feeding tickets into the Printer Mechanism: (Refer to the label on printer)
• Check to ensure that the tickets have been placed in the ticket tray with the
proper black dot orientation.
• Insert the leading ticket into the Printer Mechanism’s insertion guide area. The
ticket should be fed about a ½" into the mechanism; at this time, the machine
automatically completes the feeding process.
• If printer has been slid out from rack, make sure that the printer is closed.
• The printer is ready to receive information.
To Next Page
Loading...
