48
10.3 Display of the Basic Inverter
Status LED - green
Constant Motor stopped (Standby)
Blinking Motor run
Error LED - red
The Type of shown error which occurred is indicated by the Blinking-code of the ERROR
LED.
1 blink Undervoltage
2 blinks Overcurrent / Overload
3 blinks Inverter Overheat
4 blinks Overvoltage
5 blinks Code Error
6 blinks Motor Overheat (External Contact is open)
For detailed information concerning the possible reason and how to reset each error, see
chapter 11 Failure Messages.
To Next Page
Loading...
