96
12 Maintenance
The HYDROVAR does not require any special maintenance.
However, the cooling fan and the vents should be freed of dust occasionally. Also the
temperature around the unit should be checked from time to time.
All modifications must be done by qualified personnel! For mounting and repairs at the
HYDROVAR, qualified service technicians are available.
Demounting:
The HYDROVAR must be disconnected from the power supply before any work can be
carried out. Look at the pump- and motor-instruction.
Please take your personal protection equipment.
For further information, please ask your distributor!
“ITT” and „Engineered for life“ are registered trademarks of ITT
Industries, Inc.
All other trademarks or registered trademarks are property of their
respective owners.
All data subject to change without notice.
To Next Page
Loading...
