ITT HYDROVAR Series User Manual

57
40
40 SUBMENU
DIAGNOSTICS
In this parameters the current temperature, voltage and current of the chosen inverter can
be monitored even during operation of the HYDROVAR.
These parameters are only readable!
Possible settings: 1-8
43
43 TEMP. INVERTER
XX % XX°C
Temperature of the selected unit
The current value determines the temperature inside the selected unit and is shown in
°Celsius and also in percent of the max. allowed temperature.
44
44 CURR. INVERTER
XXX %
Current of the selected unit
This value determines the output current of the HYDROVAR in percent to the max. rated
current output.
This value determines the voltage which is applied from Power supply at the moment.
This value determines the output frequency supplied from the HYDROVAR at the moment.
41
41 PROD. DATE
XX.XX.XXXX
Production Date of the HYDROVAR
42
42 SEL. INVERTER
1
Selection of the desired unit
45
45 VOLT. INVERTER
XXX V
Voltage of the selected unit
46
46 OUTPUT FREQ.
XX.X Hz
Output Frequency of the selected unit

ITT HYDROVAR Series Specifications

General

Brand	ITT
Model	HYDROVAR Series
Category	Control Unit
Language	English