87
1100
1100 SUBMENU
SETUPS
1120
1120 PASSWORD 2
0000
Enter password by pressing ▲ or ▼
The below mentioned parameters are just available after entering the password!
For more information, contact your distributor!
1125
1125 CLR ERRORS
UNIT X
Clear Error Memory of selected unit
or ALL units (Cascade Serial)
Possible settings: 1 – 8, ALL
To clear the Error Memory either one specific unit (1-8) or ALL units can be selected.
For reset press ► button till “RESET” appears.
1130
1130 CLR MOTORH.
UNIT X
Clear Motor Hours for selected unit
or for ALL (Cascade Serial)
Possible settings: 1 – 8, ALL
Set desired unit where the Motor Hours should be cleared (or ALL) and press ► button till
“RESET” appears.
1135
1135 CLR OPERAT.
Press ► 3 sec.
Clear Operation Time
The Operation Time indicates the total time the HYDROVAR is connected to power supply.
For reset the Operation time of the current HYDROVAR press
► button till “RESET”
appears.
To Next Page
Loading...
Need help?
General
