To Next Page

To Previous Page

0110

0110 SET PASSW.

0066

Set Password by pressing ▲ or ▼

Possible settings:

The pre-set password (0066) can be changed if necessary.

After the password has been changed, it is recommended to make some notes about the

new password.

0115

0115 LOCK FUNCT.

OFF

Possible settings with ▲ or ▼

Possible settings: ON - OFF

OFF: All parameters in the main menu can be changed without the need of a password.

ON: If the LOCK FUNCTION is activated, no changes can be done in the main menu.

The HYDROVAR can be just started or stopped by using the push buttons (▲ or

▼). In order to change the set value, the LOCK FUNCTION must be reset to OFF.

0120

0120 DISP. CONTR.

70 %

Display Contrast

Possible settings: 10 – 100%

Can be adjusted between 10 - 100%, for improved clarity of the display depending on the

installation position.

0125

0125 DISP. BRIGHT

100 %

Display Brightness

Possible settings: 10 – 100%

The backlight illumination of the Display can be adjusted.

Questions and Answers:

Need help?

Do you have a question about the ITT HYDROVAR Series and is the answer not in the manual?

ITT HYDROVAR Series Specifications

General