JAKA Zu MiniCab v1.1 13
Note:
When the power is on, press any key, and the handle buzzes twice a second.
During the power-on process, LOGO lamp first flashes red, blue and green alternately, accompanied by three buzzes, and then
LOGO lamp flashes orange and waits for the IPC to go online. When the controller program is running normally, the LOGO lamp
flashes blue. After the robot is enabled, the LOGO lamp flashes green.
When you are using the handle to operate the robot, please make sure that the robot you are operating is within sight, and follow
relevant safety regulations to prevent injury to people or damage to equipment around the robot.
To Next Page
Loading...
